Search
Search
Search

RCA Abrasion Wear Tester For Surface Coating Specimens Conform ASTM F2357-04

The abrasion wear tester is mainly used for testing the surface paint film, ink, electroplating coating and wear resistance of mobile phone, laptop computer, silicone, rubber plastic, hardware and other shell products. Paper tape wear tester in accordance with ASTM F2357-04 test standard. The RCA tape abrasion tester is suitable for testing the abrasion resistance of coating on the plastic surface.Rub the rolled unoiled paper or tape against the sample when using. Depending on its abrasion resistance, the load of the softer material can be reduced by 55G or 175G with a certain number of turns.

Abrasion wear testers are an important tool used in various industries to test the wear resistance of different materials and coatings. RCA scroll tape abration tester widely used in mobile phone keypad printing, mobile phone case, MP3, CD player, laptop, PDA, electrical shell and other products. Tape grinding machine can also be used to test the abrasion resistance of cell phone P.D.A laptop and various surface coating products. RCA tape wear tester for reliable test, Load 275 g, 175 g. 55 g. The effect of friction between unoiled papers or tape and the sample was determined by a certain number of turns.

abrasion wear tester
The Test Speed16 revolutions per minute 
The Test Cycle1800 laps/roll
Testing MethodContinuous/gap
Driving ModeElectric drive mode
Counterweight175g (precision ±5g) 55g, 275g(optional)
Control Function4 digit LED display, and 1-9999 arbitrary setting
Alarm FunctionCount up to stop
Accessories PartsOne two-way equalizer, one set of tools, one magnifying glass, three o-rings, one roll of paper tape
Working VoltageAC 220V, 50 Hz, 5A
The Machine Size730 * 490 * 410 mm

The RCA tape abrasion tester is also a useful tool for testing the abrasion resistance of coatings on plastic surfaces. The tester works by rubbing the RCA tape against the sample, and based on its abrasion resistance, the load of the softer material can be reduced by 55G or 175G with a certain number of turns. These testers are used to measure the resistance of surfaces to wear and tear caused by friction, rubbing, scratching, and other similar processes. The abrasion wear testers are essential for ensuring the quality and durability of various products, including electronics, hardware, and other shell products.

RCA Abrasion Wear Testing Machine Structure and Design Bursting Strength Tester for Cardboard and Paper Testing
Key Life Tester – Keyboard Key Life Tester for the test Samples Plug and Pull Force Testing Machine for Cell Phone, Keyboard
Pendulum Impact Tester for Plastics According to ISO 179-2 Wire and Cable Bend Testing Machine – Manufacture Price

The RCA abrasion wear tester is a type of testing machine that is widely used to determine the abrasion resistance of surface coatings on plastic materials. It is designed to conform to the ASTM F2357-04 standard, which outlines the test method for determining the abrasion resistance of coatings on plastic substrates. This article will provide an overview of the RCA abrasion wear tester, its structure, design, and applications. By using these testers, manufacturers can ensure that their products meet the required standards and provide the necessary resistance to wear and tear.

The RCA abrasion wear tester consists of a rotating drum, which is mounted horizontally on a base. The drum is made of a hard material, such as steel, and has a diameter of 6 inches. The drum is rotated at a speed of 60 rpm, and the sample is held in contact with the drum by a spring-loaded arm. Structure of RCA Abrasion Wear Tester:
The design of the RCA abrasion wear tester is based on the principle of abrasive wear. The tester applies a specific amount of force to the surface of the sample, which causes it to rub against the rotating drum. The rubbing action causes the surface to wear, and the tester measures the amount of wear that occurs. The tester uses a weight of 500g, which is applied to the sample through the spring-loaded arm. Design of RCA Abrasion Wear Tester:
The tester uses a standard RCA test tape, which is made of a nylon backing and a coating of abrasive particles. The tape is wrapped around the drum, and the sample is held in contact with the tape by the spring-loaded arm. The tester is designed to perform a specific number of cycles, which is determined by the ASTM F2357-04 standard.
The RCA abrasion wear tester is widely used in industries such as automotive, electronics, and manufacturing, where the quality and durability of products are essential. It is used to test the abrasion resistance of coatings on plastic substrates, such as mobile phone and laptop computer shells. Applications of RCA Abrasion Wear Tester:
related page logoASTM F2357 – 10 Standard Test Method for Determing the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool “RCA” Abrader
related page logoSOURCE PAGE: RCA Abrasion Wear Tester 7-IBB Machine Demonstration Video Sample Physical Test
related page logoSOURCE PAGE: Instruction Videos|RCA Abrasion Wear Tester Operating Instructions Video
related page logoSOURCE PAGE: Critical Study on Scratch Resistance Test Methods|Performance Coatings International Laboratories, USA
related page logoSOURCE PAGE: Normal Tool RCA Abrasion Wear Tester Equipment Features and Technical Parameters
related page logoSOURCE PAGE: Abrasion Wear Testers Products Catalog from Norman Tool, Inc
related page logoSOURCE PAGE: RCA Abrasion Wear Tester 7‐IBB|Test Method Reference: ASTM F2357‐10
RCA Abrasion Wear Tester For Car Paint Surface Coating
The RCA tape paper friction testing machine’s design of the test system is advanced and reasonable, the manufacturing process is standardized, and the appearance is beautiful and generous.
The main functional components of the RCA tape abrasion tester adopt the world famous brand configuration (high gold content), the technical principle is advanced and reliable, and the noise and energy saving are best controlled.
The matching of parts for paper friction testing is good, and the main functional components are imported with international advanced level.
Use RCA tape abrasion tester to improve the safety and reliability of the product, can ensure users for a long time, high frequency of use.
The RCA tape wear friction tester for paper bagtest has good operability, maintainability, good temperature stability and durability, good safety performance, and does not pollute the environment or harm human health.
All wires in the control cabinet have special equipment to print the serial number and number, the line is clear, at a glance.
The abrasion resistance of the unoiled paper and tape against the specimen is determined by a certain number of turns.Equipment Features
Reduce the load of 55 g or 175 g for softer materials.
Two methods of sample fixation for rca abrasion wear tester are available.
Tape abrasion resistance tester for coating surface with a lamp magnifier is attached for viewing.
Counter: digital display counter. RCA wear-resistant paper tape 1 roll
Test load 55g, 175g, one dust jacket, three O – Ring
Please enter your email, so we can follow up with you.