If you are making the salt spray test with +80 ℃ or +85 ℃, What you should do ? Because all the salt spray test chambers factories only promise the temperature range for their salt fog chambers is +20 °C ~ +55 °C. This is a fact and cannot be changed. Because the test container material from salt spray chambers manufacturers are corrosion resistant PVC plate. This material has excellent corrosion resistance during salt spray testing. But the disadvantage of this PVC sheet is that when the temperature is higher than +55 ℃, the PVC sheet begins to soften.
When the sample is tested at a temperature of +80 ℃, It is likely that the shell of the machine will be melted away due to the high temperature. Water flowed out of the test area, causing a lot of standing water on the laboratory floor. If there were other highly sophisticated experimental instruments next to this salt spray chamber, The large amount of water flowing out will damage some of the surrounding experimental equipment. This kind of loss, just think of, will feel very terrible !
| Model Description # | WEW-YW-90D-85 |
| Inner Dimension(mm) | 900*600*500 (W*D*H) |
| Outer Dimension(mm) | 1470*950*1350 (W*D*H) |
| Temperature Range | +20℃ ~ +85℃ |
| Spray Method | Non crystalline nozzle |
| Sample Qty: 15 Degree Angle | 60 Pieces , 150*70(mm) |
| Room Temperature Tests | NSS ACSS 35℃±1℃/ CASS 50℃±1℃ |
| Pressure Barrel Temperature | NSS ACSS 47℃±1℃/ CASS 63℃±1℃ |
| Compressed Air Pressure | 1.00±0.01kgf/cm2 |
| Heater: Laboratory Power | 2.5 KW |
| Saturation Device | 0.5 KW |
| Water Tank (L) | Plastic Tank 25L |
World-Class Corrosion & Environmental Solutions
Experience the gold standard in salt spray testing. Our equipment is engineered to exceed global standards (ASTM, ISO, IEC), ensuring the highest level of reliability for your material validation.
As you can see from the picture of the machine below, This salt spray chamber from Wewon is made of stainless steel 316. Stainless steel 316 material is the advantage of corrosion resistance, Under the condition of +100℃, the 316 SUS material will not have any deformation or damage problems. Yes, stainless steel material, and not afraid of +100 ℃ high temperature, is it ? Even if the test area can reach the high temperature of +80℃ or +85℃, the control part of the machine and the circuit template, It is not affected by the high temperature in the test area. Therefore, This stainless steel 316 material salt spray test chamber is very good to solve the user in very high temperature conditions, for salt spray test.
One of the key benefits of Wewon’s salt spray test chambers is their precise temperature and humidity control, which ensures that the test environment remains consistent and accurate. The chambers are equipped with advanced humidifying systems and automatic water replenishment, allowing for continuous and reliable testing. Additionally, the chambers are made of high-quality materials, such as reinforced acrylic and corrosion-resistant PTFE, which guarantees durability and longevity. Although this high temperature corrosion resistant test condition, the use of the scope is not very wide.
But many laboratories still want it. For example, Many girls when they are getting married, They choose to buy wedding dresses instead of renting them. I believe you can understand this truth ! Another important feature of the salt spray test chambers are their user-friendly interface. Users can easily input and adjust testing parameters through the touch-screen control panel, which displays real-time data and alerts. The chambers also have multiple safety features, such as double-layered glass doors and over-temperature protection, ensuring a secure testing environment.
 |
WEW-YW-90D-85 model Salt Spray Chamber Photo 1 | WEW-YW-90D-85 model Salt Spray Chamber Photo 3 |
|
WEW-YW-90D-85 model Salt Spray Chamber Photo 2 | WEW-YW-90D-85 model Salt Spray Chamber Photo 4 |
