Search
Search
Search

The Best Industrial Convection Ovens for Your Production

The industrial convection ovens are widely used in research and production units such as aerospace, petroleum, chemical, shipbuilding, electronics, and communications. It is mainly used for curing BPO glue, PI glue, and BCB glue, as well as dust-free drying of high-precision electronic components, electronic ceramic materials, and high-temperature sterilization and aging tests for electrical products, materials, and spares.

The industrial convection oven is designed to meet the heating, aging, baking, thermal curing, and stress relief needs in various industrial fields. At Wewon, We understand the significance of finding the perfect industrial convection oven for your specific requirements. Our ovens are designed to deliver exceptional results, providing precise temperature control, uniform heat distribution, and energy efficiency. Whether you need an oven for heat treatment, drying, or sterilization processes, We have the ideal solution for you !

We prioritize the quality and durability of our products, Employing advanced manufacturing techniques and utilizing high-grade materials. Our team of skilled technicians ensures meticulous craftsmanship, meeting international standards and certifications. By choosing Wewon as your trusted supplier, You can rely on our industrial convection ovens to withstand rigorous work environments and provide exceptional longevity !

Industrial Convection Oven
Equipment Mode VE-WEW-030L VE-WEW-072L VE-WEW-125L
Testing Volume 30 Liters 72 Liters 125 Liters
Test Room Size W300*D350*H300mm W400*D450*H400mm W500*D500*H500mm
External Dimension W700*D600*H1250mm W700*D710*H1450mm W780*D770*H1550mm
Temperature Range RT+25℃ ~ +200℃ RT+25℃ ~ +300℃ RT+25℃ ~ +200℃
Time Setting 0-9999 Minutes 0-9999 Minutes 0-9999 Minutes
Vacuum Degree 760mmHg ~ 1 Torr 760mmHg ~ 1 Torr 760mmHg ~ 1 Torr
Temperature Uniformity ± 3℃ ± 3℃ ± 5℃
Power Voltage AC 380V/50Hz AC 380V/50Hz AC 380V/50Hz
Power Consumption 2.8 kW (Max) 3.5 kW (Max) 4.5 kW (Max)
Control Mode:  Button Control Button Control Button Control
Working Environment Ambient Temp 5℃ ~30 ℃ Relative Humidity≤80% Altitude ≤ 2000 meters

With our extensive experience and expertise in the industry, We have established a strong reputation for delivering reliable and efficient solutions to clients worldwide. Our dedicated customer support team is committed to providing personalized assistance, answering any queries, and guiding you through the selection process to ensure you find the perfect industrial convection oven that meets your unique needs. By investing in a Wewon industrial convection oven, You are choosing a reliable partner in enhancing your operational efficiency and achieving optimal results.

Experience the difference with our high-quality products, backed by our unwavering commitment to customer satisfaction. Please note that for laboratory vacuum ovens, we accept customized designs. Considering that customers have various test conditions, It is very necessary to carry out customized production according to the actual needs of customers. If you have customized needs, Please let our technical staff know in advance. In order to avoid mistakes, Our design department needs to know the actual needs of the customer in advance to avoid any dimensional errors.

Regularly check the oil condition and replace it promptly if deteriorated to ensure the proper functioning of the vacuum pump. Check the oil level regularly and adjust it to meet the requirements. The oil level should be at the center of the oil mark when the vacuum pump is running. Maintenance for Industrial Convection Oven
The oil change interval should be determined by considering the actual operating conditions and performance requirements. For a new vacuum pump used for clean and dry gas extraction, it is recommended to change the oil after approximately 100 hours of operation. The oil change interval can be appropriately extended once there is no visible black metallic powder in the oil.
Generally, the vacuum pump should be overhauled after 2000 hours of operation. Check the aging condition of the sealing components and inspect the exhaust valve for cracks. Clean any deposits on the valve and valve seat. Clean the internal parts of the vacuum pump, such as the rotor, vanes, and springs, preferably using gasoline and dry them. Rubber parts can be wiped dry with a cloth after cleaning. Be careful not to damage the parts during the cleaning and assembly process.
After reassembly, perform a trial run. It is recommended to run the vacuum pump for 2 hours without load and change the oil twice. Some volatile substances may remain in the vacuum pump after cleaning, and the pump should be operated normally before being put into regular operation.
Check for any looseness at the connections and fittings of the vacuum pump pipeline. Rotate the vacuum pump by hand to verify its flexibility. Activate the motor and check the rotation direction.
Once the vacuum pump is running normally, open the outlet pressure gauge and the inlet of the system gradually, while monitoring the motor load. Control the flow and head of the vacuum pump within the range specified on the nameplate to ensure optimum efficiency and energy-saving.
10. The bearing temperature of the vacuum pump should not exceed 35°C above the ambient temperature, with a maximum temperature of 80°C. If any abnormal noise is detected, stop the vacuum pump immediately and investigate the cause.
When stopping the vacuum pump, close the gate valve and pressure gauge first, and then stop the motor. Within the first month of operation, change the lubricating oil after every 100 hours. Afterward, change the oil every 500 hours.
Regularly adjust the packing gland to ensure normal dripping conditions in the packing chamber (dripping is recommended). Periodically check for wear in the shaft sleeve and replace it promptly if significant wear is observed.
In winter, after the vacuum pump is shut down, open the drain plug at the bottom of the pump body to remove any remaining medium and prevent freezing damage.If the vacuum pump is not used for an extended period, disassemble the pump, dry it, apply grease to the rotating parts and connections, and store it properly.
related page logo Industrial Ovens: Ultimate Guide to Buying the Right One for You The Best Batch Ovens for Your Business
related page logo The Best Industrial Convection Ovens for Your Production The Best Vacuum Ovens for Your Laboratory
related page logo How to Choose the Right Vacuum Oven with Pump for Your Needs The Best Vacuum Drying Ovens for Industrial Applications
related page logo Best Vacuum Chamber Ovens and Testing Chambers for Your Needs The Best Vacuum Lab Ovens for Your Research
Internal Material: Made of SUS stainless steel plate, resistant to strong acids, alkalis, and low thermal deformation. Machine Features:
External Material: SECC steel plate with electrostatic powder coating in a sleek white color, providing an aesthetically pleasing and high-quality finish.
Insulation Material: 100Kg/m3 high-density glass wool insulation, ensuring excellent thermal insulation and temperature retention.
Adjustable tightness of the door closure, with a silicon rubber seal for a high vacuum seal. The tempered and bulletproof double-layer glass door allows observation of objects inside the chamber.
Heating, storage, testing, and drying are conducted in an oxygen-free or inert gas-filled environment to prevent oxidation.
Heating Element: M-type stainless steel heater, pollution-free, dustproof, and with a long service life.
Temperature control is achieved through a PID microcomputer with intelligent temperature control calculation. The PV/SV simultaneous display is available, and it can also be programmed and controlled via PLC.
Temperature sensor input using a CA (K) type temperature head, with a 12V output.
The current controller adopts a solid-state relay (SSR) with thyristor, ensuring no contact and no spark phenomenon, providing safety and high stability in current control. The output proportion is automatically adjusted based on the temperature controller signal.
Timer: Digital display from 0 to 9999, enabling fully automatic temperature control with timing functions. Power supply is cut off when the set time is reached.
Timing and alarm functions. Vacuum pump configuration (optional).
Please enter your email, so we can follow up with you.