Search
Search
Search

Safety Instructions for IP X7 X8 Water Immersion Test Equipment

When it comes to testing equipment for waterproof capabilities, the IP X7 and IP X8 water immersion tests are widely used. These tests are designed to determine the ability of equipment to withstand water immersion and ensure that they meet certain safety standards. However, it’s important to follow safety instructions during the testing process to prevent any accidents or damage to the equipment. First and foremost, it’s important to ensure that the equipment being tested is properly prepared and secured before the test begins.

This includes removing any batteries or other power sources, ensuring that all cables and ports are properly sealed, and ensuring that any open or exposed components are covered or protected. During the test itself, it’s important to follow proper safety protocols to prevent any accidents or injuries. This includes wearing appropriate protective gear, such as gloves and goggles, and ensuring that the testing area is properly ventilated.

Safety Instructions for IP X7 X8 Water Immersion Test Equipment
Do not operate in explosive atmosphereSafety Conditions
Do not use this product in places where flammable and explosive materials are placed, otherwise safety may be endangered.
Make sure the power supply voltage matches the rated voltage before turning on the power.AC Power Supply
The power supply standard used by this product is AC220, 50Hz
Only when the power supply is cut off and the power plug is unplugged, can the routine maintenance, repair or replacement of the circuit breaker be carried out. Maintenance Issues
The internal cleaning work and fault repair of the instrument must be operated by professionals.
It is forbidden to open the control box at ordinary times to avoid electric shock accidents.

Finally, after the testing is complete, it’s important to thoroughly dry and inspect the equipment before using it again. This includes removing any excess water, thoroughly cleaning all components and ports, and ensuring that the device is fully operational. In addition, It’s important to follow the specific testing procedures outlined for the IP X7 and IP X8 tests. These tests involve completely immersing the equipment in water for a specified amount of time and at a specified depth, and then checking for any damage or malfunctioning.

While the IP X7 and IP X8 water immersion tests are important for ensuring that equipment is properly waterproofed, it’s important to follow proper safety guidelines and procedures to prevent any accidents or damage to the equipment and to ensure that the equipment performs as intended. It’s also important to fully inspect and dry the equipment after testing to ensure that it is fully operational. By adhering to these safety guidelines, you can conduct IP X7 and IP X8 water immersion tests safely and effectively.

Power Condition: 1∮ 220V 50Hz. The input voltage error range is ±10%, and the machine should be properly grounded to prevent damage caused by machine leakage.Installation Notes
Equipment operating environment conditions: room temperature conditions
The machine should be placed on a level ground with a certain degree of flatness for installation and positioning.
When moving, the power must be cut off before proceeding, and the control box cannot be dropped or dropped too heavily, so as not to loosen the electronic components in the control box and cause circuit failure;
Before operation, you should be familiar with the operation steps and methods, and special personnel should use it.

The IP X7 and IP X8 water immersion tests are important measures to ensure that equipment is completely waterproofed and can withstand water immersion without damage or malfunctioning. Ordering IP X7 and IP X8 water immersion tests equipment can be critical for companies and manufacturers in industries such as electronics, industrial machinery and medical equipment where water exposure can pose significant risks. Moreover, Adherence to these standards can be regulatory requirements for manufacturers in certain jurisdictions.

The IP ratings system also provides a standard of compliance and assurance for both manufacturers and consumers, making it easier for the latter group to understand how well a device can withstand exposure to water and other environmental factors. Ordering IP X7 and IP X8 water immersion tests equipment is essential for anyone who wants to ensure the quality and performance of their products, comply with regulatory requirements, and build trust with customers. By taking this step, companies and manufacturers can safeguard their brand reputation and avoid costly disruptions caused by damaged or malfunctioning equipment.

This test must not be used for tests on or containing the following objects:(1) Explosives:Precautions Notice
1. Nitroglycol (ethylene glycol dinitrate), nitroglycerin (glycerol trinitrate), nitrocellulose and other explosive nitrates.
2. Trinitrobenzene, trinitrotoluene, trinitrophenol (picric acid) and other explosive nitro compounds.
3. Peracetic acid, methyl ethyl ketone peroxide, benzoyl peroxide and other organic peroxides.
Metals: “lithium”, “potassium”, “sodium”, yellow phosphorus, phosphorus sulfide, red phosphorus.1. Spontaneous Combustion:(2) Combustibles:
Celluloid: calcium carbide (calcium carbide), phosphated lime, magnesium powder, aluminum powder, sodium bisulfite.
Potassium oxoacid, sodium chlorate, ammonium chlorate and other chlorates.2. Oxide Properties
Potassium peroxyacid, sodium peroxyacid, ammonium peroxyacid and other peroxyacids.
Potassium peroxide, sodium peroxide, barium peroxide and other inorganic peroxides.
Potassium nitrate, sodium nitrate and other nitrates.
Potassium hypochlorite and other hypochlorites. Sodium chlorite and other chlorites.
Diethyl ether, gasoline, acetaldehyde, propylene oxide, carbon disulfide and other substances whose ignition point is less than -30°C.(3) Combustibles:
Ordinary ethane, ethylene oxide, acetone, benzene, methyl ethyl ketone and other substances with ignition points above -30°C but below 0°C.
Methanol, ethanol, xylene, amyl acetate and other substances whose ignition point is above 0°C and below 30°C.
Kerosene, light oil, turpentine, isoamyl alcohol, acetic acid and other substances whose ignition point is above 30°C and below 65°C.
Hydrogen, acetylene, ethylene, methane, ethane, propane, butane and other gases that may burn at 1 atmosphere at a temperature of 15°C.(4) Flammable Gas:
Please enter your email, so we can follow up with you.