Search
Search
Search

Tensile Tester Machine for Earloop Mask Tensile Strength Test

Tensile tester machine for earloop mask tensile strength test is very necessary ! Because of the COVID-19 reason, There has a huge quantity earloop face masks requirement for Chinese at the beginning for year 2020. Chinese Government encourages enterprises and groups to purchase medical mask production equipment and tensile tester to meet the market’s shortage of masks. In order to purchase and ensure that the produced surgical face mask meet the national hygiene standards, It is necessary to purchase the tensile tester machine for ear loop face masks tensile strength test.

Wewon Environmental Chambers Co., Ltd. has 20 years working experience and manufacture the tensile testers. If you has limited budget for medical mask tensile strength tester and can not afford the cost of instron tensile tester, mts tensile tester, or tinius olsen tensile tester, Please inquiry to us. You will be pleased to contact us to buy a good quality and cheap tensile tester machine there. Then you will be pleased with the quality and cost-effectiveness of the tensile tester machine which you have purchased from Wewon Environmental Chambers Co., Ltd.

Tensile Tester Machine for Earloop Mask Tensile Strength Test with Computer Control
Tensile Capacity: 5, 10, 20, 50 kgs|Tensile Tester Machine’s Model: TT-ELM-5/10/20/50
Measure Accuracy: ±0.5%|Accuracy of Deformation Indication: ±0.5%|Test Speed Range: 0.01 ~ 500mm/min
Maximum Test Stroke: 700mm (1000mm|Custom Design) Not include the fixture, clamp
Measure Resolution: 1/500,000|Effective Measure Range: 0.5~100%F.S
Valid Test Width: 350mm|Force Unit Switching: N, KN, g, kg, gf, kgf, Ib, Ibf, oz, ozf
Stop Method: Upper and lower limit safety setting|Emergency stop key|Program strength and elongation setting|Test sample failure sensing
Machine Features: Tensile tester machine can be worked for tensile tearing, stripping, compression and bending, etc
Standard Configuration: Standard Fixture|Software and Data Cable|Operating Manual|Product Certificate|Warranty Card
Tensile Tester Machine Dimensions: 550 × 480 × 1500 mm(W×D×H)|Gross Weight: 75kg
Drive System: Servo Motor + Ball Screw + Smooth Rod Linear Bearing + Synchronous Belt Drive
Power Voltage of Tensile Tester Test Machine: 1 Phase, AC220V, 50Hz, 10A

The COVID-19 pandemic has brought about an unprecedented demand for surgical masks, disposable masks, and respirators. The quality and safety of these products are crucial in protecting frontline workers and the general public from the virus. As such, the need for reliable testing equipment has become more important than ever. Tensile tester machine is suitable for surgical masks, disposable masks, respirators and other respirators for tension test.

The tensile tester adopts the vertical single-column structure, the collet spacing can be set arbitrarily within a certain range, the stretching stroke is large, the smooth operation is good, the test accuracy is good. Tensile tester machine is good solution for tensile tear and peel test of non-woven fabric or elastic band of mask. It can display real-time test curve, save test data and results, and has the function of query printing.

Tensile Tester with Tensile Strength Test for Medical Masks
Auto Restart: When the computer receives the instruction to start the test, the measurement system will reset automatically.
Self-Recovery: After the test fracture is identified automatically, the displacement beam returns to the initial position automatically at high speed.
Auto Save: Automatic storage of test data and test conditions, to prevent data loss caused by forgetting to save the disk due to sudden power failure.
Test Process: The test process, measurement, display and analysis are all calculated by the software automatically.
Display Method: Data and curves are displayed dynamically with the test process.
Result Check: The test results can be accessed at will and the data curves can be reanalyzed.
Curve Review: After the test is completed, the mouse can be chooseed to find the force value and deformation data of the test curve point by point, which is convenient and practical for the test data of various materials.
Rusult Compare: Multiple test characteristic curves can be superimposed, reproduced, amplified and compared with a group of samples by different colors.
Curve Selection: The stress and strain, force time and strength time curves can be selected to display and print.

Tensile tester machines are specialized equipment that can test the tensile strength of materials such as non-woven fabric and elastic bands used in surgical masks, disposable masks, and respirators. These machines are designed to measure the force required to pull a material until it breaks or tears. They are also capable of performing other tests such as peel tests, which measure the force required to separate two materials bonded together.

One of the notable features of tensile tester machines is their vertical single-column structure. This design allows for the collet spacing to be adjusted within a certain range, making it suitable for different types of masks and respirators. The machines also have a large stretching stroke, ensuring that the materials are tested to their maximum capacity. Additionally, the smooth operation of the machines ensures that the test results are accurate and reliable.

adobe-pdf-logoGuide to Face Masks Selection and Use|Select The Right Masks for the Risk|The Earloop Mask Tensile Strength Testing Procedure
adobe-pdf-logoPerformance evaluation of masks for medical use – Including the comparison with commercially available masks for general use
Tensile test of medical mask equipped with professional fixture
Batch Test: A batch of tests can be completed successively after the same parameters are set once.
Test Report for Stretch: Tensile tester with maximum force, tensile strength, elongation at break, modulus of elasticity, etc
Test Report for Bend: Tensile tester test equipment with maximum bending strength deflection modulus of elasticity, etc
Test Report for Compress: Maximum strength, compression strength, yield strength, modulus of elasticity, etc. Tensile tester can also be programmed and printed according to the format required by the user.
Position Limitation Protection: Tensile tester test machine has two levels of program control and mechanical protection.
Overload Protection: Automatically stop when the load exceeds 3% of the range.
Emergency Stop: Emergency stop switch is provided to cut off the power supply of the tensile tester machine in emergency.
Automatic Diagnosis: The tensile strength tester has the function of automatic diagnosis, timing the measurement system, the drive system overpressure overflow overtemperature until the inspection, the abnormal situation immediately stop.
related page logoI am trying to know how long does it take with my medical face mask effective ?
related page logoWhat are ASTM test standards for medical earloop face masks ?
related page logoWhat’s the difference between a surgical mask and a procedure mask to be used ?
related page logoWhat’s the testing purpose for the medical ear loop face masks ? The tensile tester machine is required ?
related page logoDoes there the different levels of protection with ASTM-rated medical face masks ?
related page logoTo be honestly, How do I ensure a good fit there ?
related page logoDuring the COVID-19, Why is the fit of a medical face mask important ?
related page logoHow will I know if the medical face mask is on correctly way ?
related page logoDuring the COVID-19, What’s more should I know regarding the medical face masks ?
related page logoWhat tests or ratings should I rely on to ensure my mask is safe ?

Tensile tester machines can display real-time test curves, which provide a visual representation of the material’s tensile strength. The machines can also save test data and results, allowing for easy retrieval and analysis. Moreover, the machines have a query printing function, which allows the user to print out the test results for reference. Undoubtedly, as a Tensile tester machine’s manufacturer, our factory has an independent R&D team and design engineers. Customized design and production can be completed according to customer requirements.

The tensile tester machines are a reliable solution for testing the tensile strength of materials used in surgical masks, disposable masks, and respirators. They are designed to be versatile, accurate, and efficient, making them an essential tool in ensuring the quality and safety of these products. With the ongoing demand for masks and respirators, tensile tester machines have become an indispensable part of the testing process.

related page logoTensile Testing Machine|Universal Tensile Testing Machine
related page logoEnvironmental Chambers Testing Standards For Environment and Reliability Test
related page logoSingle Column Universal Material Testing Machine – Computer Type
related page logoPendulum Impact Tester for Plastics According to ISO 179-2
related page logoDrop Weight Tear Tester Technical Parameters DWTT ASTM E436
related page logoIncline Impact Tester – Incline Impact Testing for Paper Packaging Test
Please enter your email, so we can follow up with you.